Contact: Manager Li
Address: North of Shuiyun Village, Yuchuan Industrial Agglomeration Area, Jiyuan City
Cleaning and maintenance of industrial floors
With the rapid development of industrialization today, the cleaning of industrial floors is not only related to the image of a company. If cleaning is not done well, it may mean that the production environment has hidden safety hazards. 万邦建筑小编 对工业地坪的分类清洁保养做一个简单的介绍。 The following is a brief introduction to the classification and maintenance of industrial floors by Wanbang Construction Editor .
Classification of industrial floors:
Concrete wear-resistant hardened floor
Features: high abrasion and impact resistance; a certain degree of dust resistance; high flatness; natural fire and environmental protection performance;
Application: It has good applications for large workshops, garages, shopping malls, squares, and roads.
Features: mildew-proof, waterproof, dust-proof, anti-slip, anti-static, electromagnetic wave and other characteristics, bright and diverse colors, easy to clean. It uses a one-time coating process, regardless of the size of the area, there are no joints, and it is a dust-free material with strong adhesion and excellent anti-penetration performance.
Application: electrical, electronics, machinery, food, medicine, chemical, tobacco, beverage, textile, clothing factory.
PVC地板是软质地板中最常用、最普及的地板。 Features: PVC floor is the most commonly used and most popular floor among soft floors. Environmental protection, abrasion resistance, high elasticity, fire retardant, sound absorption, antibacterial. The disadvantage is that they are afraid of being crushed by the heavy-duty roller, which is prone to dents.
。 Application: hospitals, airports, schools, office buildings, supermarkets, businesses, stadiums and other places .
Features: abrasion and compression resistance, reduced dust, hard surface, easy to clean, economical and durable. Due to its convenient construction, pollution-free, low price and long service life, it has become popular in China.
Disadvantages: Color selection has certain limitations and poor permeability resistance: For some workshops where oil pollution often exists, such as machining workshops, oil pollution can easily penetrate the inside of the floor, resulting in inability to clean thoroughly; therefore, it must be cemented Wax, the surface finish is far less than epoxy floor, especially the poor quality wear-resistant floor may also ash, so it is not suitable for floors with higher requirements on cleanliness.
Application: For industrial place, dock, parking lot, commercial store, logistics warehouse and other ground decoration needs.
Cleaning and maintenance of industrial floors:
Regular maintenance can make the industrial floor have a longer service life and have a better presentation effect. Pay attention to the following when maintaining the floor:
1. Waxing is needed after the concrete hardened floor is finished. The industrial floor needs to be maintained every six months. Regular maintenance will make the floor as smooth as new and will also extend the life of the floor.
Because the hardened concrete floor is hard, it is best to use brown silicon carbide bristles when cleaning with a scrubber. This can not only clean thoroughly, but also do ground treatment while cleaning, so that the floor always remains bright.
2. Now many factories use epoxy flooring and PVC plastic flooring. Because these flooring materials are relatively soft, it is easy to cause ground scratches if they are not handled properly. If the epoxy floor and PVC are handled in the factory workshop, not only do they need to clean the surface, they also need regular deep-care on the ground at regular intervals. It is recommended that they be waxed regularly every six months. Waxing can increase the abrasion resistance and scratch resistance of floor materials. If the workshop is relatively clean when cleaning, you can use a dust cart to clean the surface dust every day. If there is local dirt, you can use wet dust to handle it. Clean the floor thoroughly with a fully automatic floor scrubber every day or regularly according to the situation on site.
For epoxy floor parking lot, it is necessary to avoid corrosive medium soaking the floor paint film for a long time. If there is accidentally spilled liquid such as corrosive acid and alkali, please clean it up immediately to avoid stains that are difficult to recover under the effect of corrosion.
When using a fully automatic floor washer, the floor material is soft. If you use hard bristles or blades, the life of the floor will be quickly reduced. Therefore, you must use a white cleaning pad or a soft white brush to avoid unnecessary damage to the floor. While reducing the useful life of the ground.
Use driving automatic washing machine to improve cleaning efficiency and image
For daily cleaning of the ground, you can use a driving scrubber to scrub the ground, usually with clean water, which is both environmentally friendly and economical. After cleaning the ground, really bring the stains out of the parking lot to avoid the original way of moving the dust. If there is dirt in some places, you can add an appropriate proportion of detergent so that you can clean it in one place.
Jiyuan Wanbang Building Material Co., Ltd. specializes in the production of corundum wear-resistant flooring, abrasion-resistant floor aggregate, self-leveling cement, sandblasting and rust-free corundum, copper ore and so on. We will cooperate with you for a win-win situation with high-quality products, fast shipping channels and the most reasonable prices.
Carborundum manufacturers | Jiyuan Carborundum | Carborundum bases | Copper ore manufacturers | Epoxy wear-resistant floor paints | Epoxy wear-resistant floor materials | Epoxy floor wear-resistant materials manufacturers